Skip to Content
Kenall 2026

ISO-Rated Spaces Specifying Luminaires for Highly Specialized ISO-Rated Spaces

Cleanrooms are facilities dedicated to specialized industrial manufacturing or scientific research. Typical cleanroom owners produce pharmaceuticals, integrated circuits, and LED monitors and televisions. Food processing facilities are highly driven by the need to keep food free from contamination, so cleanrooms are often utilized for these applications.

Cleanroom Technicians working in a ISO-Rated environment

ISO Cleanroom Ratings: A Primer

Cleanrooms are categorized by their ability to clean particulates in a specific area. Based on the room’s ability to keep the air clean, the International Standards Organization assigns an ISO Cleanroom Rating. The room is cleaned by turning the air over via a high efficiency particulate air (HEPA) filtration system, which filters the air in per cubic meter as it flows through the system (particles/m^3). Cleanrooms are classified by the number of particles of each size that are allowed to penetrate into the room as outlined in the table below.

ISO Class Maximum concentration limits (particles/m3 of air) for particles equal to and larger than the size listed below
0.1 micron 0.2 micron 0.3 micron 0.5 micron 1 micron 5 micron
1   2        
2   24 10 4    
3 1 237 102 35 8  
4 10 2,370 1,020 352 83  
5 100 23,700 10,200 3,520 832 29
6 1000 237,000 102,000 35,200 8,320 293
7 10,000   1,002,000 352,000 83,200 2,930
8 100,000     3,520,000 832,000 29,300
9 (1.0x109)       8,320,000 293,000

Graphic demonstrating the relativity of particle sizes

The above graphic demonstratoes the relativity of particle sizes.

 

The Right Fixture for the Right Space

Diagram demonstrating how Kenall luminaires integrate into a cleanroom environment

The diagram above demonstrates how Kenall luminaires integrate into a cleanroom environment.

While luminaires themselves do not carry ISO ratings, they are designed with specific features that support the stringent requirements of ISO rated spaces. When specifying lighting for these spaces, their design must support the specific ISO rating of their intended application. The following is a general guideline of ISO rated applications:

ISO 3 and 4 ISO 5, 6, 7 and 8 ISO 9
  • Semiconductor manufacturing cleanroom (photolithography)
  • Medical device manufacturing cleanroom (final clean and packaging)
  • Pharmaceutical cleanroom - Aseptic filling
  • Aerospace – NASA satellite assembly, component manufacturing
  • R&D cleanroom (Universities and Federal National Laboratories)
  • Hard disk manufacturing and repair
  • Pharmaceutical compounding
  • ULSI Water fabrication
  • Photo mask
  • Photo resist
  • Ion lithium battery
  • Solar, medical device
  • Film/packaging
  • Fine chemical
  • ULSI Assembly Test
  • Liquid crystal displays
  • Transistors
  • Pharmaceutical cleanrooms
  • Medical device cleanrooms
  • Biotech cleanrooms
  • Life-science cleanrooms
  • ULSI Assembly Test
  • Silicon ingot
  • Computer disk assembly
  • Optical fiber
  • Miniature bearings
  • Optics for precision equipment
  • Precision measuring Chemicals for ULSI manufacturing
  • Hybrid integrated circuit
  • Photo films
  • Printed circuit boards
  • Precise printing
  • Dust free garment cleaning
  • Food processing

Specifying Lighting for ISO Rated Spaces

ISO 1 and ISO 2 Cleanrooms are extremely specialized and rare. So rare, in fact, that very few exist in the world, and as a result, very few lighting manufacturers build luminaires suitable for these applications. Kenall manufactures lighting products suitable for most cleanroom applications. Full integration into the cleanroom requires the following specialized lighting capabilities:

VIEW ALL Iso-Rated Products

  1. Seal
    The luminaire has to seal to the cleanroom ceiling.
  2. Withstand Air Pressure
    The luminaire must withstand the HVAC air pressure without bleeding air into the room prior to traveling through the HEPA filtration system (fan filter unit/FFU).
  3. Maintainable
    The luminaire must be maintained without breaking the seal to the ceiling. Generally, this is solved by using an ingress barrier door, which allows access to the inside of the luminaire via stainless steel fasteners, avoiding the need for room recertification