Skip to Content
Kenall 2026

LuxTran for Transportation

DLD1220 Main Image

DLD1220

Key Features

  • Marine-grade aluminum housing construction
  • Stainless steel latches for tool-less access to electrical compartment
  • Mounting arms allow angular adjustment for precise aiming of optical distribution

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • Underpass and Tunnel

Lamp Types

  • LED

Sizes

  • 12"x20"

Listings

  • LED
  • UL-CULWet

Have A Question?

We're Here To Help. Whether you're specifying a project, troubleshooting an existing installation, or just need technical guidance, our team is ready to assist. Reach out and we'll connect you with the right expert.

Contact Us

Technical Specifications

Electrical
 Serviceable LED module array. See Ordering Information for available color temperatures and minimum CRI offering. Maximum 5-step MacAdam variation allowance. Constant-current dimming driver. <20%THD, >0.90PF. DV Voltage Type: 120-277VAC, 50/60Hz input. 0-10V dimming protocol with 10-100% range without dim-to-dark, 0.9mA source current per luminaire. CV Voltage Type: 277-480VAC, 50/60Hz input. 0-10V dimming protocol with 6-100% range with dim-to-dark capabilities at 0V.  0.1mA typ. source current. EMC compliant with FCC 47 CFR Part 15, Class B. All: Replaceable surge suppressor rated to 20kA/kV per IEEE/ANSI C62.41 Cat. A. Passes IEC 61000-4-4 EFT and IEC 61000-4-5 (Class 4) surge evaluation.
Gasket
One-piece closed-cell silicone.
Housing
Marine-grade, die-cast aluminum construction. Light grey TGIC polyester powder coat finish with five-step pre-treatment to withstand 1,000 hour salt spray test per ASTM B117. Stainless steel safety cables attach to chassis. Four (4) rotary latches constructed of 304 grade stainless steel.
Installation
Wall or ceiling orientation. Mounting hardware provided by others. Conduit entry on side of luminaire through ¾” NPT threaded hole. Optional non-threaded entry for 3/4” conduit at back of luminaire housing. Optional ANSI photocell receptacle requires attached device (by others) at time of installation for proper ingress-protection. Suitable for installation into -40°C to 40°C ambient temperatures.
Listings
Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP66 rating per IEC 60598. Luminaire is 3G vibration tested per ANSI C136.31.
Optical
 Type II, Type V-Narrow Round and Type V Square optical distributions. 0.187" clear tempered glass or polycarbonate tertiary lens.
Photometrics
Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric data, please go to www.kenall.com
Warranty
Limited five (5) year warranty.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.