Skip to Content
Kenall 2026

MedMaster SafeSlot

BHAERS4_HS01.png

BHAERS4

Key Features

  • 4” x 48” recessed linear slot luminaire for paired, over-bed lighting
  • Provides ambient, exam and reading modes within a seamless design
  • High-output, high-CRI LED lamp sources
  • One-piece doorframe with continuous lens retention and tamper-resistant fasteners
  • Standard low-voltage controller
  • Standard IP65 and NSF2 ratings for cleanability and ingress-protection
  • Ligature resistant construction

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • Patient Rooms
  • Behavioral Health

Lamp Types

  • LED

Listings

  • IP65
  • NSF2
  • CCEA
  • ETL
  • LigatureResistant
  • BABA

Have A Question?

We're Here To Help. Whether you're specifying a project, troubleshooting an existing installation, or just need technical guidance, our team is ready to assist. Reach out and we'll connect you with the right expert.

Contact Us

Technical Specifications

Controls
Integrated low-voltage controller with dimming (MLVCD) for pillow-switch/wall-control of ambient, exam and reading modes. “Ambient” mode operates the primary light engine at 50% output. A sustained button press on the wall/bed controller sweeps light intensity (dimming) from 50% down to 0% (bi-directionally). “Exam” mode operates the primary light engine at 100% output. Dimming is not possible in “Exam mode. “Reading” mode operates an integral secondary light engine positioned nearest the headwall. A sequential button press on the wall/bed controller changes intensity (100%/66%/33%) bi-directionally. Optional secondary conduit entry available.
Doorframe
One-piece extruded 6063-T5 aluminum outer frame with low-gloss anti-microbial white TGIC polyester powder-coat finish with five-stage pre-treatment.  Inner aluminum extrusion continuously bonds lens to door.  Closed-cell silicone gasketing throughout.  Tamper-resistant T20 TORX fasteners secure doorframe to housing.
Driver/Controls
120-277VAC, 50/60Hz electrical input with serviceable constant-current drivers (<20% THD, >0.90 PF). See ‘CONTROL’ for dimming information. Minimum 85% driver efficiency.
Housing
Extruded 6063-T5 aluminum construction with aluminum endcaps. Low-gloss anti-microbial white TGIC polyester powder-coat finish with five-stage pre-treatment applied to exterior, room-side components.
Installation
Suitable for Type-IC recessed ceiling installation into 9/16” and 15/16” lay-in and tegular grid ceilings, flanged drywall ceilings and trimless mud-in installations with 5/8” drywall. See Ordering Information for Ceiling Type selection. Suitable for 0°C - 40°C ambient temperature environments.
LED Module
Serviceable mid-power LED array. See Ordering Information for available color temperature options. Minimum 82 CRI standard (R9>20) with 90 CRI optional.
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratories for Type-IC and Wet Location installations. IP64 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. Standard CCEA compliance. Ligature resistant construction. Build America, Buy America Act compliant.
Optics
7.5° asymmetric distribution option. Diffused polycarbonate outer lens with 0.188" overall thickness.  Must specify left- and right-throw for offset paired mounting over bed.
Photometrics
Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For detailed photometric information, please visit www.kenall.com.
Warranty
Limited five (5) year warranty.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Explore Related Applications

Calming Rooms

Calming Rooms

Lighting in a behavioral health calming room should support de-escalation, emotional regulation, comfort, and safety. Creating an environment that feels calming and non-institutional while avoiding sensory overload provides a therapeutic, de-escalates the patient while also meeting behavioral health safety requirements. Kenall provides safe, therapeutic solutions for calming rooms.

Explore

Dayrooms

Dayrooms

Dayrooms are communal spaces occupied by patients throughout the day, in which lighting plays a significant therapeutic and operational role. Lighting designers are challenged to balance security requirements with an environment that actively supports recovery, socialization, and emotional well-being; Kenall lighting solutions are designed to support all these aspects.

Explore

Dining Areas

Dining Areas

A behavioral health dining room is often one of the primary spaces for socialization, routine-building, behavioral observation, and therapeutic interaction. Lighting should promote a calm, welcoming atmosphere while supporting safety, visibility, and operational requirements. Support social connection, routine, dignity, and recovery with Kenall’s dining area lighting.

Explore

Exam Rooms

Exam Rooms

Behavioral health exam and treatment rooms must support accurate clinical assessment while maintaining a calm, non-threatening environment. Patient stress, sensory vulnerabilities, and ligature-resistant requirements must also be considered. Kenall lighting solutions combine the clinical functionality of traditional exam rooms with the psychological support of a healing environment.

Explore

Group Therapy Rooms

Group Therapy Rooms

Behavioral health group therapy rooms must simultaneously support communication, emotional comfort, therapeutic activities, observation, and patient safety. They are purpose-driven environments where lighting can directly influence engagement, mood, and group dynamics. Kenall lighting balances clinical visibility and security requirements with a warm, human-centered atmosphere to promote recovery and connection.

Explore

Nurse Stations | Corridors

Nurse Stations | Corridors

As the operational hub of the unit, nurses’ stations require lighting that supports clinical tasks, observation, and communication. Frequently occupied by patients, they function as extensions of the therapeutic environment. Kenall lighting ensures these areas are safe and supportive while providing the visibility, durability and security required for optimal patient care.

Explore

Observation Rooms

Observation Rooms

Behavioral health observation units are secure, short-stay medical settings designed to assess, stabilize, and treat people experiencing mental health crises. Lighting them focuses on balancing rigorous patient safety with a therapeutic environment that supports circadian entrainment and discreet clinical observation. Kenall’s lighting portfolio offers calming solutions for observation units.

Explore

Patient Bathrooms

Patient Bathrooms

Behavioral health bathrooms are among the most safety-critical spaces. Lighting design must prioritize patient safety and ligature-resistant protection while preserving comfort and dignity. Kenall bathroom lighting combines the safety requirements of a high-risk patient environment with the visual comfort and dignity of a residential bathroom, helping patients feel secure and supported during daily personal-care activities.

Explore

Patient Rooms

Patient Rooms

According to the Behavioral Health Design Guide, “Lighting in acute inpatient behavioral health settings must balance safety, therapeutic benefit, and patient dignity while supporting circadian rhythms and reducing stigma.” Kenall’s behavioral health lighting portfolio offers a variety of solutions for acute inpatient environments.

Explore

Seclusion Rooms

Seclusion Rooms

Behavioral health seclusion rooms are secure, isolated spaces where patients who pose an immediate physical danger to themselves or others are involuntarily confined. Kenall provides lighting solutions that enable staff to provide a safe space in which an agitated patient can de-escalate, optimizing their mental health and wellness.

Explore

Short Stay Units

Short Stay Units

Short stay unit lighting must prioritize patient safety via ligature-resistant construction, and trauma-informed therapeutic support. Designs utilize flush-mounted, impact-resistant fixtures, tunable-white mimicking the natural day to night cycle, and low-lux night lighting to support observation. Kenall’s behavioral health lighting portfolio offers targeted solutions for short stay units.

Explore