Skip to Content
Kenall 2026

Indigo-Clean

CSEDOIC_HS01.png

CSEDOIC

Key Features

  • Two operational modes: White Disinfection Mode & Indigo Disinfection Mode
  • KORE Technology™ design with symmetric optic distribution and uniform lens appearance
  • Universal housing accomodates either flange (drywall) or grid ceiling applications
  • Sealed housing, smooth exterior doorframe and lens for infection prevention and simplified cleaning protocols
  • One-piece sealed housing; smooth exterior overlapping doorframe and lens for simplified cleaning protocols

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • Critical Environments

Lamp Types

  • LED

Sizes

  • 1'x4'
  • 2'x2'
  • 2'x4'

Listings

  • IP66
  • MIL-STD461G
  • NSF2
  • CCEA
  • ETL
  • ISO3Class1

Related Technologies

Praesent neque felis, tincidunt et bibendum at, ultricies nec augue. Nunc a elit sodales, efficitur turpis ac, facilisis diam. Donec eu enim in mi tempus consequat. Duis in massa laoreet, venenatis massa in, condimentum est.

KORE Technology

KORE Technology

Advanced optical technology that delivers exceptional glare control, uniform illumination, and high efficacy to support accuracy, comfort, and performance.

Explore

View All Technologies

Technical Specifications

Doorframe
20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (10) for 1x4, (8) for 2×2, (12) for 2×4. 
Electrical
Serviceable mid-power white LED array and high-power 405 nm indigo LED array. Available 3700K and 4300K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 80 CRI standard with optional minimum 90 CRI available. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current drivers (<20% THD, >0.88 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range with dim-to-dark capabilities in White Disinfection Mode. 330 µA maximum source current to dimming line. Two operational modes: White Disinfection Mode is a white LED array for ambient lighting plus simultaneous low-power 405nm indigo array for low-level continuous environmental disinfection. Indigo Disinfection Mode is a high power 405nm Indigo LED array for continuous environmental disinfection. Operational mode determined via internal low-voltage device based upon input provided by external IC150 room control system. 
Housing
Standard 24-gauge cold rolled steel with dust-tight, sealed construction. Alternate material options available. Integral LED heat sink. Rigid housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours. Internal high reflectance coating. Flange finish matches housing, regardless of doorframe finish.
Installation
IC-rated for recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Universal installation into flange (drywall) or grid ceiling applications.
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratories for type IC (insulated ceilings) and Wet Location installations. ETL certified IP66 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets FED-STD-209E/Class 1 (ISO 3) Cleanrooms. CCEA Approved. EPA Est. No. 99283-WI-1.
Optical
Injection-molded, high refraction optics provided for each occupied-mode. Proprietary KORE Technology™ (Kenall Optical Radiance Engine) delivers improved visual performance and uniform diffuser luminance (<1.5:1 max/min ratio across full lens area). Impact-resistant diffused acrylic outer lens. 
Patent
Indigo-Clean products and technology covered by U.S. Patent No. US 9,039,966 and US 8,398,264. Product may also be covered by patents found at www.kenall.com/patents. Other patents pending.
Photometrics
Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please contact Indigo-Clean@Kenall.com.
Warranty
Limited five (5) year Kenall LED warranty.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.