Skip to Content
Kenall 2026

SimpleSeal

Select Model

CSSETO-NS_HS01.png

CSSETO-NS

Key Features

  • Flush walkable top surface rated for 900lb load; 1'x4', 2'x2' and 2'x4' Sizes 
  • Side or top conduit entry available
  • Designed for 2, 3 or 4" thick modular ceilings 
  • Native 590 nm Amber, 630 nm Red and 660 nm Deep red lamping options for spectrally sensitive applications such as photo-sensitive manufacturing
  • Enhanced lens luminance and 90CRI standard for better visual performance
  • Serviceable from above or below

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • Pharmaceutical
  • Vivariums
  • Laboratories
  • Research and Development
  • Meat Processing Facilities
  • Industrial Food Processing Facilities
  • Manufacturing
  • Food Processing
  • Industrial

Lamp Types

  • LED

Sizes

  • 1'x4'
  • 2'x2'
  • 2'x4'

Listings

  • IP66
  • NSF2
  • ETL
  • ISO3Class1
  • BABA

Related Technologies

Praesent neque felis, tincidunt et bibendum at, ultricies nec augue. Nunc a elit sodales, efficitur turpis ac, facilisis diam. Donec eu enim in mi tempus consequat. Duis in massa laoreet, venenatis massa in, condimentum est.

Narrow Spectrum Technology

Narrow Spectrum Lighting

Targeted wavelength solutions designed to support specialized research, manufacturing, and clinical applications where spectral precision matters.

Explore

View All Technologies

Technical Specifications

Driver/Controls
120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current drivers (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 0.4mA maximum driver source current. Serviceable from above or below ceiling structure.
Finish
All painted metal surfaces finished after fabrication in gloss white TGIC polyester powder coat with 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. 
Housing
Internal housing and room-side ceiling flange constructed of seam-welded, die-formed 18-gauge CRS.  Walkable side ceiling flange constructed of die-formed and seam-welded 16-gauge CRS, secured to housing during installation with provided hardware dependent on ceiling thickness.  See Ordering Information for ceiling thickness selection - for use with 2"-4" ceiling systems.
Installation
Recessed installation into 2", 3" or 4" thick modular structural ceiling panels. One 7/8" KO on each side of housing for conduit runs internal to ceiling system.  One 7/8" KO on top of luminaire for vertical conduit entry into luminaire, or horizontal surface run conduit entry via TCE option which provides a surface junction box and sealed feed into luminaire. Tested to 900lbs of uniform loading without damage or deflection of the luminaire structure. Suitable for -30°C to 40°C ambient environments, unless otherwise noted.
LED Module
Serviceable back-lit LED array. Native 590 nm Amber, 630 nm Red and 660 nm Deep Red (non phosphor-converted) LED options. Narrow bandwidth native sources provide optimal control over spectral emissions.  Available as single native color or separately circuited native color and white lamping. Standard 90CRI min. (R9>50). See Ordering Information for available color temperature options. Serviceable from above or below ceiling structure.
Lens
High impact diffuse acrylic lens, nominal .125" thick. Sealed to perimeter ledge of door aperture using RTV silicone and secured with continuous brackets.
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratories for recessed ceiling insulation contact (IC-rated) and Indoor Wet Location installations. IP66 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. For use in spaces that are ISO 14644-1 rated ISO3-9. Build America, Buy America Act. Compliant.
Photometrics
Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
Room-side Door
Standard one-piece, 18-gauge Type 304 stainless steel with 4B brushed finish. Other materials available. Die-formed with welded corners and a 60° progressive perimeter bend construction. Secured by countersunk flush-head stainless steel screws. Self-retracting safety cable supports doorframe during room-side servicing.
Top Access Door
16-gauge door with welded stiffening rails and die-formed perimeter. One-piece, closed cell extruded Nitrile gasketing seals doorframe to housing. Secured to housing with stainless steel counter-sunk flush-head screws. Single, hinged D-ring flush with walkable surface provides lifting point. Closed cell silicone gasket seals door to housing. Provides access to service all internal electrical components. 
Warranty
Limited five (5) year LED warranty.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Explore Related Applications

Labratories

Labratories

Educational laboratories place much greater demands on lighting than standard classrooms. Students perform detailed visual tasks, work with equipment, read instruments, conduct experiments, and often handle potentially hazardous materials. As a result, lighting must prioritize visibility, accuracy, safety, and flexibility. Kenall SimpleSeal® series and related technologies, including vivarium lighting, helps student research yield reliable results.

Explore

Research & Biosafety Labs

Research & Biosafety Labs

Due to the hazardous nature of the work performed, research and biosafety labs require lighting that balances scientific accuracy, safety, visual comfort, contamination control, and regulatory compliance.