Skip to Content
Kenall 2026

EnviroPro Downlights

EPDL6 Main Image

EPDL6

Key Features

  • 6" sealed, recessed downlight with flush lens trim
  • 730 - 4,800 delivered lumens with multiple distribution, reflector finish and lens options
  • 1% Dimming via 0-10V or DALI-2 control
  • NSF2 and IP64/IP65 ingress protection rating

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • Food Processing

Lens Types

  • .125" Clear Polycarbonate
  • .125" High-Impact Clear Acrylic

Lamp Types

  • LED

Listings

  • IP64
  • IP65
  • LED
  • NSF2
  • ETL
  • CCEAOption

Have A Question?

We're Here To Help. Whether you're specifying a project, troubleshooting an existing installation, or just need technical guidance, our team is ready to assist. Reach out and we'll connect you with the right expert.

Contact Us

Technical Specifications

Electrical
LED source available in multiple CCT and CRI combinations with a maximum 3-step MacAdam variation allowance. See Trim Ordering Information for available options. 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 0.2mA maximum source current. Optional eldoLED ECOdrive DALI-2 (DT6) / LEDcode2 driver with 1-100% range.
Heatsink
Die-cast aluminum with external radial fins for natural convection.
Installation
Suitable for ambient temperature temperatures of -30oC to +40oC, unless otherwise stated
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP64 and IP65 rating per IEC60598. NSF2 Splash/Non-Food Zone. Optional CCEA compliance.
Optical
Clear tempered glass upper lens.  1/8" clear impact-resistant acrylic or polycarbonate flush lens at ceiling trim.  Continuous seal between lens and trim ring.  Available with various reflector distribution patterns and finishes.  See Ordering Information for available options.
Photometrics
Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.  For photometric information, go to www.kenall.com.
Rough-In Frame
18-gauge die-formed, corrosion-resistant steel. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring. Provided with FMC with electrical quick-connect to Trim Section.
Trim/Housing Section
IP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Configurable with an IP64-rated Flush lens trim that is secured to the Rough-In frame with hidden torsion springs, and an IP65 Flush lens trim secured with four (4) Phillips-head, captive fasteners. See Trim Ordering Information for available options.
Warranty
Five (5) year warranty against mechanical defects.  Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.