Skip to Content
Kenall 2026

MedMaster MedSlot

MAERS4_HS01.png

MAERS4

Key Features

  • 4” x 48” recessed linear slot luminaire for paired, over-bed lighting
  • Provides ambient, exam and reading modes within a seamless design
  • High-output, high-CRI LED lamp sources
  • No visible room-side fasteners for clean aesthetic
  • Standard low-voltage controller
  • Standard IP64 and NSF2 ratings for cleanability and ingress-protection

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • Patient Rooms
  • Burn Units

Lamp Types

  • LED

Listings

  • IP64
  • ISO5Cleanroom100
  • LED
  • NSF2
  • CCEA
  • ETL
  • ISO5-8
  • BABA

Have A Question?

We're Here To Help. Whether you're specifying a project, troubleshooting an existing installation, or just need technical guidance, our team is ready to assist. Reach out and we'll connect you with the right expert.

Contact Us

Technical Specifications

Controls
Integrated low-voltage controller with dimming (LVCD) for pillow-switch/wall-control of ambient, exam and reading modes. “Ambient” mode operates the primary light engine at 50% output. A sustained button press on the wall/bed controller sweeps light intensity (dimming) from 50% down to 0% (bi-directionally). “Exam” mode operates the primary light engine at 100% output. Dimming is not possible in “Exam mode. “Reading” mode operates an integral secondary light engine positioned nearest the headwall. A sequential button press on the wall/bed controller changes intensity (100%/66%/33%) bi-directionally. Optional secondary conduit entry available. 
Driver/Controls
120-277VAC, 50/60Hz electrical input with serviceable constant-current drivers (<20% THD, >0.90 PF). See ‘CONTROL’ for dimming information. Minimum 85% driver efficiency.
Housing
Extruded 6063-T5 aluminum construction with aluminum endcaps. Low-gloss anti-microbial white TGIC polyester powder coat finish with five-stage pre-treatment. Silicone gasketing throughout.
Installation
Suitable for Type-IC recessed ceiling installation into 9/16” and 15/16” lay-in and tegular grid ceilings, flanged drywall ceilings and trimless mud-in installations with 5/8” drywall. See Ordering Information for Ceiling Type selection. Suitable for 0°C - 40°C ambient temperature environments.
LED Module
Serviceable mid-power LED array. Minimum 82 CRI standard (R9>20). See Ordering Information for available color temperature options.
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratories for Type-IC and Wet Location installations. IP64 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. Standard CCEA compliance. Meets FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Build America, Buy America Act compliant.
Optics
Standard 20° asymmetric distribution for all functions. Must specify Left- and Right-Throw for offset paired mounting over bed. Snap-in, one-piece extruded frost DR acrylic diffuser.
Photometrics
Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For detailed photometric information, please visit www.kenall.com.
Warranty
Limited five (5) year warranty.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Explore Related Applications

Patient Rooms

Patient Rooms

According to the Behavioral Health Design Guide, “Lighting in acute inpatient behavioral health settings must balance safety, therapeutic benefit, and patient dignity while supporting circadian rhythms and reducing stigma.” Kenall’s behavioral health lighting portfolio offers a variety of solutions for acute inpatient environments.

Explore