Skip to Content
Kenall 2026

MedMaster for Hybrid Operating Rooms

Select Model

MRI4SESI-Green_HS01.png

MRI4SESI-Green

Key Features

  • Green LED circuit creates an application optimized spectrum for increased visual acuity with no transmission loss due to filters
  • Non-ferrous construction and remote power supplies provide safe operation with advanced medical imaging devices
  • Symmetric, symmetric/asymmetric and full asymmetric optic distributions with uniform lens appearance
  • Suitable for surface ceiling installations
  • One-piece sealed housing; smooth exterior doorframe and lens for infection prevention and simplified cleaning protocols

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • MRI Imaging Suites
  • Surgical Suites

Lamp Types

  • LED

Sizes

  • 2'x2'
  • 2'x4'

Listings

  • IP65
  • LED
  • MIL-STD461G
  • NSF2
  • ETL
  • ISO3Class1

Have A Question?

We're Here To Help. Whether you're specifying a project, troubleshooting an existing installation, or just need technical guidance, our team is ready to assist. Reach out and we'll connect you with the right expert.

Contact Us

Technical Specifications

Doorframe
 0.050" aluminum. One-piece inset-style construction with welded corners. Gloss white TGIC polyester powder coat finish with 5-stage pre-treatment. Doorframe secured to housing with aircraft cables and captive, flush-mounted Phillips-head fasteners. Non-ferrous hardware. Antimicrobial finish standard on all exposed painted surfaces of the installed luminaire. Closed-cell silicone gasket seals doorframe to housing.
Driver/Controls
Luminaire input 24VDC from remote-located 120-277VAC, high-power-factor power supply with EMI filter.  White and green circuits must be powered from independent remote power supplies and dimmers.  Dimming line EMI filter required if utilizing dimming function. Internal non-switch mode DC-DC driver. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. See below for ordering information and power supply/filter accessories.
Housing
Hole-free, one-piece, seam-welded aluminum construction. 0.050" aluminum housing flange with mitered and welded corners. Non-ferrous components and hardware. Gloss white TGIC polyester powder-coat finish with 5-stage pre-treatment. Antimicrobial finish on all exposed painted surfaces of installed luminaire.
Installation
Surface mounting via four (4) 0.312" (0.79cm) holes.  Singular side wiring feed hole provided. All power and signal wiring must be in completely grounded aluminum conduit.   Light engine and internal driver are replaceable post-installation.  MRI room EMI filters required (see Accessories below).  Suitable for 0°C to 25°C ambient temperature environments.
LED Module
Serviceable mid-power LED array, specified as either all-green or green and white (see 'Green/White LED Layouts' diagram on page 3). 530nm green mid-power LED array.  White LED circuit with minimum 80CRI standard, 90CRI optional.  See Ordering Information for available color temperature options. 
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. IP65 rating per IEC 60598. NSF2 Splash/Non-Food Zone. Meets FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Compliant with MIL-STD 461G for radiated and conducted emissions.
Optics
High-efficiency diffused, impact-resistant acrylic lens. Symmetric/asymmetric and full asymmetric optic adds internal Total Internal Reflection optics to work in conjunction with diffused lens providing asymmetry while maintaining uniform appearance.
Photometrics
Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
Warranty
Limited five (5) year LED warranty

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.