Skip to Content
Kenall 2026

MedMaster Auracyl Sconce for MRI/Imaging Suites

MRIMAS8_HS01.png

MRIMAS8

Key Features

  • Surface wall mount – 8"W 13", 26", 38", 50" lengths
  • Non-ferrous marine-grade extruded aluminum construction
  • Sealed backlighting creates a pleasing visual accent and NSF2 listing
  • Standard antimicrobial finish for cleanability
  • Available with iMAGINE Series Graphics

Documents

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Applications

  • MRI Imaging Suites

Lamp Types

  • LED

Sizes

  • 8"x13"
  • 8"x26"
  • 8"x38"
  • 8"x50"

Listings

  • ADA
  • ETL
  • IP64
  • LED
  • NSF2

Have A Question?

We're Here To Help. Whether you're specifying a project, troubleshooting an existing installation, or just need technical guidance, our team is ready to assist. Reach out and we'll connect you with the right expert.

Contact Us

Technical Specifications

Electrical
Replaceable high-brightness ANSI 3000K or 4000K LED array. Luminaire input
24V DC from remote-mounted, 120-240V AC, high power factor power supply (MRIPS-312
ordered separately). Dimming capability controlled through compatible 0-10V dimmer (supplied
by others). 10%-100% dimming range. MRI room EMI filter required (supplied by others).
Hardware
One non-ferrous stainless steel Phillips-head fastener standard; four fasteners with IP64 option for MRIMAS813 and MRIMAS826; six fasteners for MRIMAS838 and MRIMAS850. Internal brackets and fasteners are non-ferrous and non-corrosive.
Housing
Non-ferrous marine grade extruded aluminum. Non-ferrous marine grade die-cast aluminum end caps. TGIC polyester powder coat finish – 5-stage pre-treatment; Salt spray test: 1,000 hours. Antimicrobial finish on all exposed components of installed luminaire.
Inner Lens
UV-stabilized, high impact resistant, extruded 100% DR/acrylic frost lens. Nominal thickness .100". Lens secured in place by lens frame.
Installation
Standard four-point mounting required on MRIMAS813 and MRIMAS826. Standard six-point mounting on MRIMAS838 and MRIMAS850. All power and signal wiring must be completely shielded in grounded conduit.
Listings
Luminaire is certified to UL1598 and UL8750 standards by Intertek Testing Services for Damp Location – covered ceiling and wall mount. MRIMAS813 is also UL and CUL listed. NSF2 Splash/Non-Food Zone. ADA compliant. Optional ETL certified IP64 per IEC 60598. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Kenall certifies product by both Underwriters and Intertek Testing Laboratories.
Outer Lens
Acrylic translucent white lens standard. Nominal thickness .125". Optional iMAGINE series decorative lens – see Ordering Information.
Patent
U.S. Patent No. 7,029,139; D610,294.
Photometrics
For photometric information, go to www.kenall.com
Reflector
Die-formed non-ferrous marine grade aluminum. Full reflector/wire cover – 92% reflectivity.
Warranty
One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. Warranty is void if all wiring is not completely shielded in grounded conduit.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

Ready to Specify?

From the show floor to your facility, we believe the best relationships start with a handshake. That's why you'll find our team at trade shows and industry events all year long.

Contact Us

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.